Our own special mix without lead (no cupelling necessary) and consisting of 4 main ingredients: Sodium Tetraborate (Anhydrous Borax), Sodium Carbonate (Soda Ash), Manganese Dioxide and Silica Sand.
This flux is especially good for melting Karat or pure gold with your Kwik Kiln® and delivers a beautiful, shiny finish to your gold without sticking. Good for smelting gold ores in all Kwik Kilns®, along with other gold processing kilns or furnaces. Non-sticky, usually needs no thinning.
Premium Gold Flux will treat other precious metals such as silver or
copper as impurities and will tend to pull them out, leaving only your gold. If
you prefer to save all precious metals in your concentrates, use our white Melting
Flux, which has no manganese dioxide. You will then end up with an amalgam of
your precious metals, meaning, whatever silver or copper there is will be mixed
in with the gold.
Note: Flux is weighed into doubled 4 mil bags, for USPS Priority shipping, rather than the plastic jar shown. If this is not acceptable, please inform us during your purchase.